View HA-5222883_77153.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HA-5222/883
January 1996
Dual, Low Noise, Wideband, Precision Operational Amplifier
Description
The HA-5222/883 is a dual, high performance, dielectrically isolated, monolithic op amp, featuring precision DC characteristics while providing excellent AC characteristics. Designed for audio, video, and other demanding applications, noise (3.3nV/Hz at 1kHz typ), total harmonic distortion (<0.005% typ), and DC errors are kept to a minimum. The precision performance is shown by low offset voltage (0.3mV typ), low bias currents (40nA typ), low offset currents (15nA typ), and high open loop gain (128dB typ). The combination of these excellent DC characteristics with fast settling time (0.4s typ) make the HA-5222/883 ideally suited for precision signal conditioning. The unique design of the HA-5222/883 gives this device outstanding AC characteristics, including high unity gain bandwidth (40MHz typ) and high slew rate (37V/s typ), not normally associated with precision op amps. Other key specifications include high CMRR (95dB typ) and high PSRR (100dB typ). The combination of these specifications will allow the HA-5222/883 to be used in RF signal conditioning as well as video amplifiers.
Features
* This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. * Gain Bandwidth Product . . . . . . . . . . . . . 100MHz (Min) * Unity Gain Bandwidth . . . . . . . . . . . . . . . . 30MHz (Min) 40MHz (Typ) * High Slew Rate . . . . . . . . . . . . . . . . . . . . . . 25V/s (Min) 37V/s (Typ) * Low Offset Voltage. . . . . . . . . . . . . . . . . . 0.75mV (Max) 0.30mV (Typ) * High Open Loop Gain . . . . . . . . . . . . . . . . . 106dB (Min) 128dB (Typ) * Channel Separation (at 10kHz) . . . . . . . . . . 110dB (Typ) * Low Voltage Noise (at 1kHz) . . . . . . . . 5.9nV/Hz (Max) 3.3nV/Hz (Typ) * Low Current Noise (at 1kHz) . . . . . . . . 2.7pA/Hz (Max) 1.3pA/Hz (Typ) * High Output Current . . . . . . . . . . . . . . . . . 30mA (Min) 56mA (Typ) * Low Supply Current (per Op Amp.) . . . . . . 10mA (Max) 8mA (Typ)
Ordering Information
PART NUMBER HA7-5222/883 TEMPERATURE RANGE -55oC to +125oC PACKAGE 8 Lead CerDIP
Applications
* Precision Test Systems * Active Filtering * Small Signal Video * Accurate Signal Processing * RF Signal Conditioning
Pinout
HA-5222/883 (CERDIP) TOP VIEW
OUT1 -IN1 +IN1 V-
1 2 3 4 + 1 2 +
8 7 6 5
V+ OUT2 -IN2 +IN2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright (c) Intersil Corporation 1999
Spec Number
3-169
511062-883 File Number 3717.1
Specifications HA-5222/883
Absolute Maximum Ratings
Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . . 36V Differential Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . . V+ to VPeak Output Current (Pulsed at 1ms, 10% Duty Cycle) . . . . . 100mA Continuous Output Current. . . . . . . . . . . . . . Short Circuit Protected Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . . +300oC
Thermal Information (Typical)
Thermal Resistance JA JC CerDIP Package . . . . . . . . . . . . . . . . . . . 96oC/W 16oC/W Package Power Dissipation Limit at +75oC CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.04W Package Power Dissipation Derating Factor Above +75oC CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.4mW/oC
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Temperature Range . . . . . . . . . . . . . . . . -55oC to +125oC Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . 5V to 15V VINCM 1/2 (V+ - V-) RL 1k
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 15V, RLOAD = 1k, VOUT = 0V, Unless Otherwise Specified. GROUP A SUBGROUPS 1 2, 3 Input Bias Current +IB VCM = 0V, +RS = 100.1k, -RS = 100 VCM = 0V, +RS = 100, -RS = 100.1k VCM = 0V, +RS = 100.1k, -RS = 100.1k V+ = +3V, V- = -27V 1 2, 3 1 2, 3 1 2, 3 1 2, 3 -CMR V+ = +27V, V- = -3V 1 2, 3 Large Signal Voltage Gain +AVOL VOUT = 0V and +10V 4 5, 6 -AVOL VOUT = 0V and -10V 4 5, 6 Common Mode Rejection Ratio +CMRR VCM = +10V, V+ = +5V, V- = -25V, VOUT = -10V VCM = -10V, V+ = +25V, V- = -5V, VOUT = +10V RL = 1k 1 2, 3 1 2, 3 4 5, 6 -VOUT RL = 1k 4 5, 6 LIMITS TEMPERATURE +25oC +125oC, -55oC MIN -0.75 -1.5 -80 -200 -80 -200 -50 -150 12 12 106 100 106 100 88 86 88 86 12.0 11.5 MAX 0.75 1.5 80 200 80 200 50 150 -12 -12 -12.0 -11.5 UNITS mV mV nA nA nA nA nA nA V V V V dB dB dB dB dB dB dB dB V V V V
PARAMETERS Input Offset Voltage
SYMBOL VIO
CONDITIONS VCM = 0V
+25oC +125oC, -55oC
-IB
+25oC +125oC, -55oC
Input Offset Current
IIO
+25oC +125oC, -55oC
Common Mode Range
+CMR
+25oC +125oC, -55oC
+25oC +125oC, -55oC
+25oC +125oC, -55oC
+25oC +125oC, -55oC
+25oC +125oC, -55oC
-CMRR
+25oC +125oC, -55oC
Output Voltage Swing
+VOUT
+25oC +125oC, -55oC
+25oC +125oC, -55oC
Spec Number 3-170
511062-883
Specifications HA-5222/883
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPLY = 15V, RLOAD = 1k, VOUT = 0V, Unless Otherwise Specified. GROUP A SUBGROUPS 4 5, 6 -IOUT VOUT = -10V, RL = 1k 4 5, 6 Quiescent Power Supply Current +ICC VOUT = 0V, IOUT = 0mA 1 2, 3 -ICC VOUT = 0V, IOUT = 0mA 1 2, 3 Power Supply Rejection Ratio +PSRR VSUP = 10V, V+ = +20V, V- = -15V, V+ = +10V, V- = -15V VSUP = 10V, V+ = +15V, V- = -20V, V+ = +15V, V- = -10V 1 2, 3 1 2, 3 LIMITS TEMPERATURE +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC MIN 30 30 -20 -22 90 86 90 86 MAX -30 -30 20 22 UNITS mA mA mA mA mA mA mA mA dB dB dB dB
PARAMETERS Output Current
SYMBOL +IOUT
CONDITIONS VOUT = +10V, RL = 1k
-PSRR
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS Table 2 Intentionally Left Blank. See AC Specifications in Table 3.
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTIC Device Characterized at: VSUPPLY = 15V, RLOAD = 1k, Unless Otherwise Specified. LIMITS PARAMETERS Input Noise Voltage Density SYMBOL EN CONDITIONS RS = 0, fO = 10Hz RS = 0, fO = 100Hz RS = 0, fO = 1kHz Input Noise Current Density IN RS = 500k, fO = 10Hz RS = 500k, fO = 100Hz RS = 500k, fO = 1kHz Gain Bandwidth Product GBWP VOUT = 200mVP-P , fO = 100kHz NOTES 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1 TEMPERATURE +25oC +25oC +25oC +25oC +25oC +25oC +25oC -55oC to +125oC 1 +25oC -55oC to +125oC Slew Rate SR VOUT = 2.5V, CL = 50pF VPEAK = 10V 1 -55oC to +125oC MIN 100 88 30 25 25 MAX 16.0 6.6 5.9 24.0 6.6 2.7 UNITS nV/Hz nV/Hz nV/Hz pA/Hz pA/Hz pA/Hz MHz MHz MHz MHz V/s
Unity Gain Bandwidth
UGBW
VOUT = 200mV
Full Power Bandwidth
FPBW
1, 2
-55oC to +125oC
398
-
kHz
Spec Number 3-171
511062-883
Specifications HA-5222/883
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTIC (Continued) Device Characterized at: VSUPPLY = 15V, RLOAD = 1k, Unless Otherwise Specified. LIMITS PARAMETERS Minimum Closed Loop Stable Gain Rise and Fall Time SYMBOL CLSG CONDITIONS RL = 1k, CL = 50pF VOUT = 100mV NOTES 1 TEMPERATURE -55oC to +125oC MIN 1 MAX UNITS V/V
tR, tF
1, 4
+25oC -55oC to +125oC
-
20 35 25 30 660
ns ns % % mW
Overshoot
OS
VOUT = 100mV
1
+25oC -55oC to +125oC
Power Consumption NOTES:
PC
VOUT = 0V, IOUT = 0mA
1, 3
-55oC to +125oC
1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These parameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization based upon data from multiple production runs which reflect lot to lot and within lot variation. 2. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2VPEAK). 3. Power Consumption based upon Quiescent Supply Current test maximum. (No load on outputs.). 4. Measured between 10% and 90% points. 5. Input Noise Voltage Density and Input Noise Current Density limits are based on characterization data.
TABLE 4. ELECTRICAL TEST REQUIREMENTS MIL-STD-883 TEST REQUIREMENTS Interim Electrical Parameters (Pre Burn-In) Final Electrical Test Parameters Group A Test Requirements Groups C and D Endpoints NOTE: 1. PDA applies to Subgroup 1 only. SUBGROUPS (SEE TABLE 1) 1 1 (Note 1), 2, 3, 4, 5, 6 1, 2, 3, 4, 5, 6 1
Spec Number 3-172
511062-883
HA-5222/883 Die Characteristics
DIE DIMENSIONS: 78 x 185 x 19 mils 1 mils 1980 x 4690 x 483m 25.4m METALLIZATION: Type: Al, 1% Cu Thickness: 16kA 2kA GLASSIVATION: Type: Nitride (Si3N4) over Silox (SIO2 5% Phos.) Silox Thickness: 12kA 2kA Nitride Thickness: 3.5kA 1.5kA WORST CASE CURRENT DENSITY: 4.2 x 104A/cm2 SUBSTRATE POTENTIAL (Powered Up): VTRANSISTOR COUNT: 128 PROCESS: Bipolar Dielectric Isolation
Metallization Mask Layout
HA-5222/883
OUT1
V+
-IN1 +IN1
VOUT2
-IN2
+IN2
Spec Number 3-173
511062-883
HA-5222
DESIGN INFORMATION (Continued)
The information contained in this section has been developed through characterization by Harris Semiconductor and is for use as application and design information only. No guarantee is implied.
Typical Performance Curves
Unless Otherwise Specified: TA = +25oC, VSUPPLY = 15V CHANNEL SEPARATION vs FREQUENCY
SUPPLY CURRENT/AMPLIFIER vs TEMPERATURE
TYPICAL PERFORMANCE CHARACTERISTICS Device Characterized at: Supply Voltage = 15V, RL = 1k, CL = 50pF, Unless Otherwise Specified PARAMETERS Input Offset Voltage CONDITIONS See Table 1 TEMPERATURE +25oC Full Average Offset Voltage Drift Input Bias Current See Table 1 See Table 1 Full +25oC Full Input Offset Current See Table 1 +25oC Full Differential Input Resistance Input Noise Voltage Input Noise Voltage Density See Table 1 fO = 0.1Hz to 10Hz fO = 10Hz fO = 100Hz fO = 1kHz Input Noise Current Density fO = 10Hz fO = 100Hz fO = 1kHz THD & N Large Signal Voltage Gain See Note 1 VOUT = 0V to 10V +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC Full TYPICAL 0.30 0.35 0.50 40 70 15 30 70 0.33 6.4 3.7 3.3 8 2.7 1.3 0.005 128 120 UNITS mV mV V/oC nA nA nA nA k VP-P nV/Hz nV/Hz nV/Hz pA/Hz pA/Hz pA/Hz % dB dB
Spec Number 3-174
511062-883
HA-5222
DESIGN INFORMATION (Continued)
The information contained in this section has been developed through characterization by Harris Semiconductor and is for use as application and design information only. No guarantee is implied. TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Device Characterized at: Supply Voltage = 15V, RL = 1k, CL = 50pF, Unless Otherwise Specified PARAMETERS Common Mode Rejection Ratio Unity Gain Bandwidth CONDITIONS VCM = 10V -3dB TEMPERATURE Full +25oC +125oC -55oC Gain Bandwidth Product 1kHz to 400kHz +25oC +125oC -55oC Minimum Gain Stability Output Voltage Swing RL = 333 RL = 1K Full Full +25oC Full Output Current Output Resistance Full Power Bandwidth Channel Separation Slew Rate FPBW = SR/2VPEAK, VPEAK = 10V fO = 10kHz VOUT = 2.5V VOUT = 10V Full +25oC +25oC +25oC +25oC +125oC -55oC Rise Time VOUT = 100mV +25oC +125oC -55oC Overshoot VOUT = 100mV +25oC +125oC -55oC Settling Time 10VSTEP, AV = -1 0.1% 0.01% Power Supply Rejection Ratio Supply Current Minimum Supply Voltage NOTE: 1. AVCL = 10, fO = 1kHz, VOUT = 5Vrms, RL = 600, 10Hz to 100kHz, Minimum resolution of test equipment is 0.005%. VS = 10V to 20V Quiescent, VOUT = 0V, IOUT = 0mA Functional Operation Only. Other Parameters May Vary. +25oC +25oC Full Full +25oC TYPICAL 95 40 33 50 140 115 160 1 110 112.5 112.1 156 10 398 110 37 39 36 16 17 17 12 11 12 0.4 1.5 100 8 15 UNITS dB MHz MHz MHz MHz MHz MHz V/V V V V mA V kHz dB V/s V/s V/s ns ns ns % % % s s dB mA/Op Amp V
Spec Number 3-175
511062-883
HA-5222
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Sales Office Headquarters
NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. Taiwan Limited 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029
Spec Number 3-176
511062-883

▲Up To Search▲

Price & Availability of HA-5222883

	To Download HA-5222883 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .